MikroTik routers and firewalls, bandwidth management, VPN between branches and Hotspot.
Internet bandwidth is not shared fairly between users, the branch links are unstable, or nobody knows the router settings.
RouterOS configuration, bandwidth queues, firewall, VPN between branches, Hotspot and central Wi-Fi management with CAPsMAN.
We pin down the device model, the number of users and the internet service.
Offices, shops, hotels, factories and multi-branch companies that need internet management, a firewall and branch connectivity.
Yes. With queues, each user or department gets a defined share and no one can take the whole bandwidth.
With failover, traffic moves to the other line automatically when one fails; load balancing across both lines is also possible.
Delivered on site for companies, factories, offices and shops across Mazandaran, Iran, and remotely for clients abroad. On-site cities include:
Write a few lines about your current setup and what you need; after a review I will propose the approach and an estimate.
Request a project reviewCall
From hEX and hAP for small offices to the RB5009 and CCR series for large networks, and CHR for virtual servers: this article covers the MikroTik router families, RouterOS licence levels and how to choose the right model.
· 4 min read
Before any configuration you need to know which port is the internet, what address the internal network uses and who may access the router. This article covers network planning, logging in with Winbox, creating a user, updating RouterOS and building the internal bridge, step by step.
· 3 min read
A MikroTik router connects to the internet in three common ways: behind a modem with DHCP, PPPoE with the modem in bridge mode, or a static IP. See all three, plus NAT, DNS and connection checks, step by step.
· 3 min read
With a DHCP server, computers, phones and IP phones get their IP address, gateway and DNS automatically. Learn the quick Setup wizard, manual configuration, address reservations for fixed devices, DHCP for several VLANs and troubleshooting.
· 3 min read
MikroTik srcnat and dstnat with examples and ready-to-use commands: masquerade, src-nat, port forwarding, hairpin NAT and one-to-one NAT.
· 4 min read
A static route to another network, the default route, failover between two internet lines with distance and check-gateway, recursive routing and policy routing in RouterOS 7, with examples and ready-to-use commands.
· 4 min read